Single component polyurethane floor varnish

PARKET Technical Data Sheet (pdf) Safety data sheet Where to find the product ?

DESCRIPTION

• Single component polyurethane floor varnish for interior wood.
• Long term protection for wood subject to abrasion: parquets, stairs...

PROPERTIES

• Extra resistant. Protects and waterproofs the wood.
• High resistance to wear, abrasion and scratches.
• Can be applied to untreated wood, or sealed wood in a good condition.
• Non-slip.
• Satin appearance.

BASIC USES

• Indoors.
• Parquets, stairs, floors…
• Can be used on all types of wood normally used for this type of structure.

ADVICE OF THE PROFESSIONALS

• Good surface preparation is essential for the final appearance of the finish.
• Depending on the condition of the surface several sanding stages will be required: from grade 40 to 180. It is advisable to only use one grade at a time.
• For a perfect result:
  • Apply Parket in the direction of the wood grain. Facing the light and starting opposite the door, so as to work towards it. Do three criss-cross passes in one application.
  • Start with the edges and then do the surface by working in zones of 2 metres by 2 metres.
  • Do not open the windows during application to avoid it drying too quickly.
• Coloured base before topcoat:
  • Apply a coat of Linitop Prim & Finish.
  • After drying and without sanding, finish with two coats of Parket, sanding between the two coats.
• Precautions:
  • Do not cover the sealed surface with carpets or protective covers for 14 days after the application of the floor varnish.
  • Wait at least 48 to 72 hours before putting the furniture back, protecting the feet with pads:
    • Normal usage: 7 days.
    • Intense usage: 3 weeks.

Informations : Coverage : 15 m²/l Application tools : Brush or short mohair roller. Application temperature : 10°C to +30°C Dust-dry : 4 h. Recoatable: 24 h. Cleaning of the tools : White spirit.

Container size : 0,75L - 2,5L